FingerCaptureStatus Enumeration

Namespace: id3.FingerCapture

Definition

Provides a comprehensive list of status codes representing various states and events during the fingerprint capture process.

These codes facilitate precise control and monitoring of the capture sequence and device behavior.

Fields

Name	Value	Description
noDevice	0	Indicates there is no device connected.
deviceIdle	1	Indicates that the device is in an idle state, not currently performing any actions or processes.
deviceReady	2	Signifies that the device is powered on, initialized, and awaiting instructions or commands.
deviceError	3	Describes a state where the device has encountered an error, potentially affecting its ability to operate normally.
captureInProgress	4	Denotes that the device is currently engaged in a capture process, such as recording video or scanning data.
captureStarted	100	Marks the initiation of a capture process, indicating the device has begun capturing data.
captureStopped	101	Reflects the cessation of a capture process, indicating no current data acquisition.
startTakingSnapshot	102	Represents the beginning of a snapshot capture process, detailing when the device starts capturing a single frame or data point.
specific	1000	Serves as a starting point for device-specific status codes, allowing for extended status representations beyond the common set.
placeFinger	200	User action required: Place a finger on the sensor as instructed by the device interface.
removeFinger	201	User action required: Remove the finger from the sensor as instructed by the device interface.
rollFinger	202	User action required: Roll the finger on the sensor to capture the entire fingerprint.
fingerPlaced	203	Confirms that a finger has been correctly placed on the sensor.
fingerRemoved	204	Confirms that the finger has been removed from the sensor following the capture or as required.
moveFingerUp	205	User action required: Move the finger upward on the sensor to adjust the positioning.
moveFingerDown	206	User action required: Move the finger downward on the sensor to adjust the positioning.
moveFingerLeft	207	User action required: Move the finger left on the sensor to adjust the positioning.
moveFingerRight	208	User action required: Move the finger right on the sensor to adjust the positioning.
pressFingerHarder	209	User action required: Apply more pressure to ensure a clearer fingerprint capture.
swipeTooFast	210	The swipe speed was too fast; adjust to a slower swipe for effective capture.
swipeTooSlow	211	The swipe speed was too slow; adjust to a faster swipe for effective capture.
swipeTooSkewed	212	The swipe angle was too skewed; realign and attempt the swipe again.
swipeBadSpeed	213	The swipe speed was inappropriate; adjust to the recommended speed for optimal results.
imageTooSmall	214	The captured image is too small to be useful; ensure full finger placement.
imagePoorQuality	215	The captured image is of poor quality; conditions may need to be improved (e.g., cleanliness, lighting).
rollPartLift	216	Part of the finger was lifted during a roll; maintain contact throughout the motion.
rollTooFast	217	The rolling motion was too fast; slow down to capture detailed prints.
rollDirty	218	The sensor surface is dirty or obstructed; clean the sensor or ensure only one finger is in contact.
rollShifted	219	The finger shifted during rolling; keep the finger steady and aligned.
rollTooShort	220	The rolling action was too brief; roll the finger for a longer duration to capture the entire print.
fewerFingers	221	Fewer fingers than required were detected; ensure correct finger placement.
tooManyFingers	222	More fingers than required were detected; only place the necessary fingers on the sensor.
wrongHand	223	The wrong hand was used; ensure the correct hand is used as per the instructions.
fakeFingerDetected	224	A fake or synthetic finger was detected; ensure that only real human fingers are used.
rotateHandClockwise	225	Rotate the hand clockwise to properly align the fingerprint with the sensor.
rotateHandCounterclockwise	226	Rotate the hand counterclockwise to properly align the fingerprint with the sensor.
thumbsRotated	227	One or both thumbs are incorrectly rotated; adjust the thumb(s) to the correct position.
indexRotated	228	One or both index fingers are incorrectly rotated; adjust the index finger(s) to the correct position.
tightenYourFingers	229	Tighten the placement of your fingers to ensure clear and distinct captures.
spreadYourFingers	230	Spread your fingers apart to avoid overlapping and ensure each finger is distinctly captured.